Case WX90, Service Manual

Page: 21 / 51

SAFETY PRECAUTIONS
SR2-1-5
15501 9-35990
slopes before stopping it at the end of the working
day.
Align the upperstructure to the tracks in order to allow
to easily get on and off the driver’s compartment.
Move all controls to the position specified for machine
stopping. Refer to the Operator's Manual.
Never park on an incline without accurately blocking
the machine to prevent unexpected movement.
F o l l o w s t o p p i n g i n s t r u c t i o n s c o n t a i n e d i n t h e
Operator's Manual.
MAINTENANCE
GENERALITIES
Carefully read the Operator's Manual before starting,
o p e r a t i n g , m a i n t a i n i n g , f u e l l i n g o r s e r v i c i n g t h e
machine in any manner.
Read all safety plates mounted on the machine and
observe instructions they contain before starting,
operating, repairing, fuelling or servicing the machine.
Do not allow unauthorised personnel to repair or
service the machine.
Follow all recommended maintenance and service
procedures.
Do not wear rings, wrist watches, jewellery, loose or
h a n g i n g g a r m e n t s , s u c h a s t i e s , t o r n c l o t h i n g ,
scarves, unbuttoned or unzipped jackets that can get
caught in moving parts. Wear certified safety clothes
such as: hard hat, no-slip footwear, heavy gloves, ear
protection, safety glasses, reflector vests, respirators
w h e n r e q u i r e d . A s k y o u r e m p l o y e r a b o u t s a f e t y
regulations in force and protective equipment.
Do not use controls or hoses as hand holds. Hoses
and controls are movable parts and do not provide
solid support. Besides, controls may be inadvertently
m o v e d a n d c a u s e u n e x p e c t e d m o v e m e n t o f t h e
machine or its attachments.
Do not jump on or off the machine. Always keep both
hands and one foot, or both feet and one hand in
contact with steps and/or grab rails.
Never service the machine with someone sitting in the
driver’s seat, unless this person is an authorised
operator assisting in the maintenance being carried
out.
Keep the operator’s compartment, step plates, grab
rails and handles clear of foreign objects, oil, grease,
mud or snow to minimise the danger of slipping or
stumbling.
Clean mud or grease from your shoes before climbing
on the machine or driving it.
N e v e r a t t e m p t t o o p e r a t e t h e m a c h i n e o r i t s
attachments from any position other than sitting in the
operator’s seat.
Keep the driver’s seat free from foreign objects,
especially if these are not secured.
Should it be necessary to move the attachment for
maintenance purposes, do not raise or lower the
attachment from any other position than sitting in the
o p e r a t o r ’ s s e a t . B e f o r e s t a r t i n g t h e m a c h i n e o r
moving its attachment, sound the horn and require
that nobody remains near the machine.
Raise the attachment slowly.
Always lock all moving components or parts of the
machine that must be lifted for maintenance purposes
using adequate external means as required by local
and national regulations. Do not allow anyone to
pass or stay near or below a raised attachment. If you
are not absolutely sure about your safety, do not stay
or walk under a raised attachment.
Do not place head, body, limbs, hands, feet or fingers
n e a r a r t i c u l a t e d c u t t i n g e d g e s d e p r i v e d o f t h e
necessary guards, unless they are suitably and safely
locked.
Never lubricate, repair or adjust the machine with the
e n g i n e r u n n i n g , e x c e p t w h e n t h i s i s s p e c i f i c a l l y
required by the Operator's Manual.
Do not wear loose clothing, jewellery near rotating
parts.
When service or maintenance require access to areas
that cannot be reached from the ground, use a ladder
o r s t e p p l a t f o r m c o n f o r m i n g t o l o c a l o r n a t i o n a l
regulations to reach the working area. If such means
are not available, use machine grab rails and steps.
Always perform all service or maintenance work with
the greatest care and attention.
Shop and/or field service platforms or ladders should
be manufactured and maintained in accordance with
local or national safety regulations in force.
Disconnect batteries and label all controls to warn
that service work is in progress, according to local
and national safety regulation requirements.
Block the machine and all attachments to be raised
according to local and national safety regulation
requirements.
Do not check or fill fuel tanks or install batteries near
burning or smoking materials and open flames due to
the presence of flammable vapours.
The fuel filler pipe nozzle must be constantly kept in
contact with the filler neck and this even before fuel
starts flowing in. Keep this contact from the beginning
to the end of the fuelling operation to avoid possible
generation of sparks due to static electricity.
Use a truck or trailer to haul a failed machine. Should
it be necessary to tow it, provide for suitable danger
signals as required by the local norms and regulations
a n d o b s e r v e r e c o m m e n d a t i o n s g i v e n i n t h e
Operator's Manual. Load/unload the machine on firm
level ground providing safe support to the wheels of
the truck or trailer. Use strong access ramps, with
adequate height and angle. Keep the trailer flatbed
free of mud, oil or slippery materials. Tie the machine
s e c u r e l y t o t h e t r a i l e r a n d b l o c k c a r r i a g e s a n d
upperstructure.
Never align holes or slots using your fingers; always