Case WX90, Service Manual

Page: 41 / 51

SAFETY PRECAUTIONS
15501 9-35990
SR2-2-17
SAFETY TRANSPORTING
• The danger of tipping is present when loading/
unloading the machine onto/from a truck or trailer
bed.
- Be sure to observe local regulations when
transporting the machine on public roads.
- Provide an appropriate truck or trailer for
transporting the machine.
• Take the following precautions when loading/
unloading the machine:
1. Select firm level ground.
2. Be sure to use a loading dock or ramp.
3. Be sure to have a signal person when loading/
unloading the machine.
4. Always turn the auto-idle ( A/I ) switch off when
loading or unloading the machine, to avoid
u n e xp e ct e d s pe ed i nc re as e d u e t o
unintentional operation of a control lever.
5. Always select the slow speed mode with the
travel speed selector. In the high speed mode,
travel speed may automatically increase.
6. Avoid steering while driving up or down the
ramp as it is extremely dangerous. If steering
is unavoidable, first move back to the ground
or flatbed, modify travelling direction, and
begin to drive again.
7. Operate the safety lever but do not operate
any other control except travel control when
driving up or down the ramp.
8. The top end of the ramp where it meets the
flatbed is a sudden bump. Take care when
traveling over it.
F5048
F5827
WEDGES
BLOCKS
RAMPS