Case WX90, Service Manual, Page: 28 / 51

SAFETY PRECAUTIONS
15501 9-35990
SR2-2-4
USE HAND HOLDS AND STEPS
• Falling is one of the major causes of personal injury.
- When you get on and off the machine, always face
the machine and maintain a three-point contact
with the steps and handrails.
- Do not use any control as a handhold.
- Never jump off the machine.
- Never get on and off a moving machine.
- Be careful of slippery conditions of platforms,
steps, and handrails when leaving the machine.
ADJUST THE OPERATOR'S SEAT
• A seat poorly adjusted for operator or work
requirements may quickly fatigue the operator
leading to improper operations.
- The seat should be adjusted whenever machine
operator changes.
- The operator should be able to fully press the
pedals and correctly move the control levers with
his back resting against the seat back.
- If not, move the seat fore and aft, and check again.
F1442
F1443