Case SV208D, Service Manual

Page: 14 / 31

INTRODUCTION
At least once each day, remove debris accumulation around moving components such as bearings, pulleys, belts,
gears, cleaning fans, etc. More frequent cleaning of your machine may be necessary depending on the operating
environment and conditions.
Inspect the electrical system for loose connections and frayed insulation. Repair or replace loose or damaged parts.
Do not store oily rags or other flammable material on the machine.
Do not weld or flame cut any items that contain flammable material. Clean items thoroughly with non-flammable
solvents before welding or flame-cutting.
Do not expose the machine to flames, burning brush, or explosives.
Promptly investigate any unusual smells or odors that may occur during operation of the machine.
48150518 26/02/2018
9