Case CX300C, Operator'S Manual

Page: 59 / 288

3 - CONTROLS/INSTRUMENTS
FORWARD CONTROLS
Hand control levers and pedals
Arm and upperstructure swing left-hand
control lever
The speed of movement of the arm or the upperstructure
swing depends on the control lever tilt angle. In the inter-
mediate position two movements can be obtained simul-
taneously.
NOTE: When the upperstructure swing control is re-
leased, the upperstructure may continue to rotate due to
the force of inertia. In this event, make allowance for the
extra movement by releasing the control slightly earlier.
VF3UDD-001
1
(1) The arm extends.
(2) The arm retracts.
(3) The upperstructure turns to the left.
(4) The upperstructure turns to the right.
VF3UDD-002
2
Boom and bucket right-hand control lever
The speed of movement of the boom or the bucket de-
pends on the control lever tilt angle. In the intermediate
position two movements can be obtained simultaneously.
FIQCKA-001
3
(5) The boom lowers.
(6) The boom raises.
(7) The bucket retracts (filling).
(8) The bucket extends (dumping).
FIQCKA-002
4
3-9