Case CX300C, Operator'S Manual

Page: 170 / 288

4 - OPERATING INSTRUCTIONS
PARKING THE UNIT
Parking the machine
1. Position the machine on flat, level ground, away from
soft ground, excavations or poorly shored cavities.
2. Place the upperstructure frame in line with the under-
carriage, retract the attachment, dig the bucket into the
ground to anchor it.
3. Turn the engine throttle button to low idle position and
let the engine run for approximately five minutes.
4. If necessary, activate the anti-theft protection. (Refer
to page 4-4 ).
GHN2P4-002
1
5. Stop the engine, remove the ignition key.
GHN2P4-003
2
6. Place the function cancellation lever in the central po-
sition (safety bar in inward position).
GHN2P4-004
3
4-40