6 - MAINTENANCE
Bleed
Replace
Grease
Check
Drain
Clean
Interval
Page
no.
Maintenance Action
No.
of
pts.
6-10
Swing reduction gear
1
X
6-34
Suction filter (Note W)
1
X
6-34
Return circuit filter (Note N-P-W)
1
X
6-34
Pilot filter (Note N-W)
1
X
Every 2000 hours
6-67
Air conditioning
1
X
6-34
Main pump output hydraulic hoses (Note Q)
—
X
Every 4000 hours
6-34
Boom, arm and bucket cylinder hydraulic hoses (Note Q)
—
X
Every 4500 hours
6-71
Diesel Particulate Diffuser
(DPD)
(Note M)
1
X
6-34
Suction filter (Note W)
1
X
Every 5000 hours
6-34
Hydraulic fluid (Note R-W)
1
X
3-76
Safety valves (Note S)
2
X
6-27
Fuel pre-filter (Note T)
1
X
6-27
Fuel filter (Note T)
1
X
6-27
Fuel supply pump filter (Note U)
1
X
6-50
Tracks (Note U)
2
X
X
6-57
Fuel tank filter (Note U)
1
X
6-58
Fire extinguisher (Note V)
1
X
6-60
Machine settings (Note S)
—
X
X
6-60
Machine inspection (Note U)
—
X
X
As required
6-61
Cylinders for leaks (Note U)
—
X
Note A: Check every week and whenever installing the quick coupler.
Note B: To be checked every 6 months by a specialist.
Note C: If all these linkage points are not equipped with genuine parts, these points must be greased every 10 hours.
Note D: Or every 6 months.
Note E: Or when the message "Air filter" is shown on the message screens.
Note F: Check after the first 50 hours during the run-in period.
Note G: If all these linkage points are not equipped with genuine parts, these points must be greased every 50 hours.
Note H: Or every two years or twice a year (autumn/spring) if antifreeze is used.
Note J: Or after cleaning 6 times.
Note K: Or after the primary filter has been cleaned 3 times.
Note L: Drain after the first 250 hours during the run-in period.
Note M: Ask your CASE CONSTRUCTION Dealer to check this.
Note N: Replace after the first 250 hours during the run-in period.
Note P: If biodegradable fluid is used, it is imperative for the servicing interval to be reduced to 1000 hours.
Note Q: Or every 2 years, whichever comes first.
Note R: If biodegradable fluid is used, it is imperative for the servicing interval to be reduced to 2000 hours.
6-85
Summary of Contents for CX300C
