Case CX300C, Operator'S Manual

Page: 56 / 288

3 - CONTROLS/INSTRUMENTS
Combined height and weight adjustment
Lower the handle (1) to decrease the rigidity of the sus-
pension. Raise the lever (1) backward to obtain harder
suspension. The indicator (2) must be green when the
operator is sitting on the seat.
FEF3PS-001
2
Fore/aft adjustment
Hold the control (3) in the raised position, slide the seat to
the required position and then release the control.
R3L4WI-001
3
Seat back angle adjustment
WARNING
Unexpected machine movement!
Before tilting the back of the seat forward, you
must raise the armrests. This prevents acci-
dental operation of the control levers.
Failure to comply could result in death or se-
rious injury.
W0210A
To adjust the seat back angle, hold the lever (4) in the
raised position. Move with the seat-back to the desired
position and then release the lever.
LH5A8I-001
4
Lumbar support adjustment
Use the inflation bulb (5) to inflate the lumbar support.
Press the button on the tip of the inflation bulb (5) to de-
flate the lumbar support.
URKPC5-001
5
3-6