Cascade Sciences CVO-10, Installation & Operation Manual

Page: 32 / 56

32 | P a g e
cascadesciences.com | Tel. 503 847-9047
CONTROL OVERVIEW
Home Screen Icons and Controls
Setpoint Button
This blue button shows the current setpoint. The setpoint is the temperature the oven heats to
once the Heat Button is pushed (see below).
Pressing the Setpoint Button brings up the setpoint page and the keypad used to enter a new
setpoint. The highest allowed setpoint is 250°F.
Heat Button
This green play-style button is visible when the oven is not heating. Pressing the button causes
the oven to heat to and then maintain the current setpoint. The red Pause Heating button
replaces the play-style button while the oven is heating.
Heating Icon
The heating icon appears whenever the oven is powering the chamber heating elements.
During normal heating operations, this icon blinks on and off as the oven pulses power to the
elements.
Pause Heating
The red pause button is visible whenever the oven is in its heating mode. Pressing it pauses
heating of the oven chamber.
Light Button
The yellow light button is partly grayed out when the oven chamber lighting is off. Pressing the
button turns the chamber lighting on and off.
Settings Button
Pressing the Setting Button calls up the Settings Menu. On this menu there are slider bar
controls for:
•
Changing the temperature and vacuum units of measurement
•
Changing the display brightness setting
Outage Indicator
This icon appears whenever the oven powers up. Dismiss it by touching the indicator after
turning on the oven. If the indicator reappears while the oven was supposed to be running, a
power outage has occurred.