Cascade Sciences CVO-10, Installation & Operation Manual

Page: 23 / 56

23 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
L
EVELING
Install the 4 leveling feet in the 4 corner holes in the bottom of the oven.
The oven must be level and stable for safe operation.
Note:
To prevent damage when moving the unit, turn all four leveling feet so that the leg of each
foot sits inside the unit.
I
NSTALL THE
O
VEN
Place the unit in a workspace location that meets the criteria discussed in the previous entries of the
Installation section.
•
Verify that the oven stands level and does not rock. Adjust the leveling feet as needed.
I
NSTALLATION
C
LEANING
The unit was cleaned at the factory, but not sterilized. It may have been exposed to contaminants en route
during shipping.
•
Remove all wrappings and coverings from shelving prior to cleaning and installation.
•
Do not clean with deionized water.
•
See the Cleaning and Disinfecting topic in the User Maintenance section (see page 45) for
more information on how to clean the oven chamber prior to putting the unit into operation.