Cascade Sciences CVO-10, Installation & Operation Manual

Page: 20 / 56

20 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
R
EQUIRED
A
MBIENT
C
ONDITIONS
These units are built for use indoors at room temperatures between 15
°
C and 40
°
C (59
°
F and 104
°
F) , at
no greater than 80% Relative Humidity (at 25
°
C / 77
°
F). Operating outside these conditions may
adversely affect the unit temperature performance.
When selecting a location to install the unit, consider all environmental conditions that can impact its
temperature performance. These include:
•
Proximity to other ovens, autoclaves, and any device that produces significant radiant heat
•
Heating and cooling vents or other sources of fast-moving air currents
•
High-traffic areas
•
Direct sunlight
R
EQUIRED
C
LEARANCES
All Ovens
These clearances are required to provide air flows for ventilation and cooling.
6 inches (152 mm) of clearance is required on the sides.
12 inches (305 mm) of headspace clearance is required between the top of the unit and any
overhead partitions.
Do not place objects on top of the oven.
A KF-25 vacuum port is located on the back of the oven for introducing vacuum-rated thermocouple
feedthroughs into the chamber or connecting to an external vacuum supply source. Leave sufficient
clearance for operators to safely access this port.
6” (152mm)
Door Swing
12” (305mm) 12” (305mm)
6” (152mm) 12” (305mm)
Vacuum Pump
Power Outlet