13
H
olliston
™
DC
Washers (16)
Blade InStallatIon
Blade irons (5)
Blade iron
Screws
Blade Hardware
(not to scale)
Blades (5)
Blade Screws (16)
Step 9a.
Remove the five shipping blocks, and
screws as shown in Figure #2. DO NOT discard the
ten (10) screws; you will need them for installing the
blades onto the fan.
attach Blade irons
Step 9B.
Attach a blade to a blade iron by first
pressing the blade iron onto the blade, then attaching
the blade iron using three blade screws and blade
washers as shown in Figure #3. Using the provided
screwdriver, tighten securely
by hand only.
Repeat
for each blade assembly.
Blade installation
Step 9c.
Before attempting to attach the blades,
review Figure #4 for blade placement on the motor.
The numbers and lines show screw placement when
attaching the five blade irons and blades assemblies
to the fan.
BLade iRon
BLade WaSheR
BLade
BLade iRon
SCReWS
Phillips
Screwdriver
Figure #2
ShiPPinG
BLoCkS
ShiPPinG BLoCkS
SCReWS
BLade and
BLade hoLdeR
Figure #3
Figure #4
