14
Caution:
Blade screws must be tightened securely
before operating the fan.
Figure #5
MotoR
Blade installation Continued
Step 10b.
Attach a blade/blade iron assembly to the
motor by using two blade iron screws provided. Place
the end of the blade iron on the motor as shown in
Figure #5. Insert the screws one by one using the
provided screwdriver. Tighten securely
by hand only
.
Repeat for each blade/blade iron assembly until all five
blades are attached to the fan as shown in Figure #6.
Figure #6
lIGHt fIXtUre InStallatIon (optIonal)
NOTE: If you are installing your fan without a light kit attached as below in Figure #1, continue with these installation
instruction Step 11a. If you have purchased a light kit for installation on your fan, skip this section and go to Step
13a on page 18 within this document.
Figure #1
