14
15
a
ntion
™
BLADE HARDWARE
BLADE INSTALLATION
Screw Driver
Blades (5)
Blade Irons (5)
Blade
Screws (5)
Blade Iron
Screws (5)
Step_1._ Attach a blade to a blade iron by first
pressing the blade iron onto the blade, then
attaching the blade iron using 4 blade screws and
blade washers as shown in Figure #2. Using the
provided screwdriver, tighten securely by hand
only. Repeat for each blade assembly.
Blade
Blade Iron
Blade Washers
Blade Screws
Blade
Washers (5)
Step_2._ Attach a blade/blade iron assembly to the
flywheel by using two blade iron screws provided.
Place the end of the blade iron on the flywheel as
shown in Figure 3. Insert the screws one by one
using the provided screwdriver. Tighten securely by
hand only. Repeat for each blade/blade iron assembly
until all five blades are attached to the fan.
FIGURE_1.
CAUTION:
Blade screws must be tightened securely
before operating the fan.
FIGURE_2.
Fly Wheel
Blade Iron
Screws
Blade Iron
LIGHT KIT HARDWARE
LIGHT KIT INSTALLATION
Glass Bowl
Light Kit
E11 50W Halogen Bulb (2)
Glass Cover
Glass Finial
Glass Fitter
Glass Fitter
Screw (3)
Light Kit Screw
(4)
Step_1._ To attach the Glass Fitter partially install
two Glass Fitter Screws into the switch housing
mounting plate. Figure 1.
Step_2._ Align the keyhole slots in the Glass Fitter
with the Fitter Screws. Figure 2.
Note: Ensure the foil side of the fitter is facing
down otherwise the light kit will not install
properly.
Switch Housing
Mounting Plate
Fitter Screws
FIGURE_1.
Fitter Screw
FIGURE_2.
FIGURE_3.
Step_3._ Turn the Glass Fitter counterclockwise until
the Fitter Screws are firmly situated in the narrow
end of the keyhole slots.
Step_4._ Install the remaining screw into the Glass
Fitter. Figure 3.
Step_5._ Tighten all three screws firmly.
