background image

4

5

a

ntion

Motor Identification Plate

RECORD_MODEL_AND_SERIAL_NUMBERS_BEFORE_INSTALLATION!_

Please take a moment to locate the model number and serial number from your fan (see below) and record 
this information on the Warranty page inside the front cover of your Owner’s Manual if it does not appear 
there already. These numbers are found on the motor identification plate affixed to the fan motor in the 
location shown below:

PLEASE INSPECT ALL PACKAGING PRIOR TO DISCARDING!
Your Casablanca fan was crafted with pride and care and inspected thoroughly prior to 
shipment. Before you begin to assemble and install your Casablanca fan, remove all 
parts from the carton and check them against the Parts Guide in this manual.
Make sure all parts are included in the box using the Parts Guide on the following pages. 

If there are missing or broken parts: 
Call 1-888-227-2178 Monday through Friday, 8 a.m. 
to 4:30 p.m. CST. Your request will be handled 
immediately. Replacement parts will be sent to you 
via Federal Express.

Proper_Parts_Handling

Do not remove lightbulbs from their packaging 
until you are ready to install them. 

Before discarding packaging materials, be certain 
that all parts have been removed. 

Use a clean, dry paintbrush to remove small 
Styrofoam pieces that may remain after unpacking.

Do not brush Styrofoam into wiring cavities. 
The blades in each pack are matched for equal 
weight to assure smooth fan operation. If more 
than one fan is being installed, do not mix blades 
from different cartons. 

When cleaning, painting, or working near your fan, 
be cautious of the fan and blades.

Always turn power to the ceiling fan OFF before 
replacing lightbulbs or working on your fan. 

Never insert anything into the path of the fan 
blades while the fan is in operation. 

Never install a fan over a pool or spa. 

Never operate a fan that has been damaged in any 
way. 

Install the fan according to the instructions in this 
manual.

If_the_fan_does_not_work:

Refer to the Troubleshooting Tips in this Owner’s 
Manual.

Call Technical Support at 1-888-227-2178.
Contact your local Authorized Service Center.
Our Web site at www.casablancafanco.com 
contains additional information on Casablanca 
products, troubleshooting, and Authorized Dealer 
or Service Centers. Please do not return this 
product to the store.

Serial Number

Antion 
TYPE 

  HANGER TYPE

DJ01 1151      MODEL 
C39G199L

Memphis, TN

 SERIAL No.: 

DJ06 2237

       

C39G199L

Model Number

Circuit Breaker

(Trip breaker for the

circuit you will be

working on)

Fuse Box

(Remove fuse for the

circuit you will be

working on)

18"  

70" 

SAFE USE

• CAUTION: RISK OF ELECTRICAL SHOCK!  Installation is to be in accordance with the National Electrical 

Code, ANSI/NFPA 70-1999 and local codes. If you are unfamiliar with the wiring codes, you should use 
a qualified electrician.  To avoid overheating and possible damage to other equipment, do not install 
control to a receptacle, fluorescent light fixture, motor-operated appliance, or transformer-supplied 
appliance.

• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed 

for ceiling fan installations. If it is not, a new box must be installed. Casablanca extension poles are 
available for sloped or high ceiling installations.

• This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. 

The maximum current requirement for the fan with light fixture is 2 amps. The fan uses about 1 amp or 
100 watts. Maximum light current is 1 amps or 100 watts of lighting.

• Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the 

canopy, make sure all wires are within the canopy and that no wires are being pinched.

WARNING: Do not bend the blade brackets when installing the brackets, balancing the blades, or 

cleaning the fan. Do not insert foreign objects in between the rotating fan blades.

Unpacking
Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check 
them against the parts listed in the Parts Guide. Before discarding packaging materials, be certain that all 
parts have been removed.

For best performance and for your warranty to be valid, use only genuine Casablanca blades, light 
fixtures, and accessories.

INTRODUCTION

•  The blades in each pack are matched for equal 

weight to assure smooth fan operation. If more 
than one fan is being installed, be careful not to 
mix blades from different cartons.

•  Inspect the contents of your carton for possible 

shipping or handling damage. If parts are missing 
or damaged, call 1-888-227-2178.

•  It is always a good idea to have an assistant to 

help with the installation.

•  When cleaning, painting, or working near your 

fan, be very careful of the fan and blades. Always 
turn the power OFF to the ceiling fan before 
working on it or replacing lightbulbs. 

•  Never insert anything into the path of the fan 

blades while the fan is in operation.

•  Never install a fan over a pool or spa. 
•  Never operate a fan that has been damaged in 

any way. Contact Casablanca Fan Company by 
calling  
1-888-227-2178, or contact your local authorized 
Casablanca dealer for assistance in obtaining 
service.

BEFORE YOU START

84"

Summary of Contents for Antion C39G199L















Reviews: