12
13
a
ntion
™
White-Neutral__
to_Fan
Red-Power_
to_Fan
Bare_from_
Ceiling
Green_from_
Mounting_Plate
Green_from_
Fan
Step_6._ Use the Red
Fan Out
Wire and connect it to
the Red Wire coming from the fan with a blue wire
cap.
Step_7._ Connect the Green wire from the Mounting
Plate, Bare Wire from the ceiling, and the Green
Wire from the downrod assembly and connect them
together with an orange wire cap.
Step_1._ Carefully tuck the wires around the
Receiver and Hanging Bracket as not to loosen the
wire caps.
Step_2._ Insert 2 Canopy Screws into the Hanging
Plate diagonally across from each other so they
match the keyholes on the canopy.
Canopy_Screws
Keyhole_Slots
Step_3._ Raise the Canopy over the Hanger Bracket.
Align the partially installed screws with the key slots
in the canopy.
Step_4._ Twist the Canopy clockwise to secure.
Step_5._ Install the third & fourth canopy screws in
the round holes on Canopy. Securely tighten all four
screws.
Step_6._ Using both hands, push the Canopy Trim
ring up to the top of the Canopy.
Step_7._ Twist the Canopy Trim ring clockwise to
secure it to the Canopy.
Keyhole_Slot
Round
Hole
WARNING:_
Do not let wires
become lodged between
Hanger Bracket and Canopy.
CANOPY HARDWARE
SECURING THE CANOPY
Screw Driver
Canopy Screw (4)
