Line Thermal Printer DEP-50
18
19
User’s Manual
3. OUTER APPEARANCE AND COMPONENT PARTS
(1) POWER switch
Turns on/off the power for the printer body.
(2) POWER lamp
Lights green when the printer is switched on
(3) ERROR lamp
Flashes red when the printing head is overheated.
(4) PAPER lamp
Flashes red when the printer is out of paper, lights red constantly if the paper is
put, but the lever is not pushed down.
(5) FEED switch (Button LF)
Feeds the paper. It is fed continuously while the switch is held down.
(6) Paper holder
Set the paper roll in this holder.
(7) PNE sensor
Detects that the paper is running out.
(8) DIP switch
Initially sets the printer at power-on and sets the functions.
(9) Platen roller unit
Detach this unit when the paper is jamming or when you clean the head.
(10) Head-up lever
Used when replacing the paper or detaching/reattaching the platen roller unit.
(11) Paper cutter
Cuts the printed paper.
(12) Power connector
Connects to the accessory AC adapter.
(13) Interface connector
Connects to a communication interface cable.
(14) Printer cover
Detach this cover when replacing the paper.
(13) RS232 Interface
Drawer Control
AC adapter
(12)Power Conector
(2) Power Lamp
Upper Cover
(3) Error Lamp
(4) Paper Lamp
(5) Weed Switch
(14) Printer Cover
Bottom Cover
(1) Power Switch
(8) DIP Switch
(6) Paper Holder
(10) Head-up-Lever
(9) Platen Roller Unit
Printer Mehanism
(11) Paper Cutter
(7) PNE Sensor
