Line Thermal Printer DEP-50
4
5
User’s Manual
IMPORTANT SAFETY INSTRUCTIONS
y
Read all of these instructions and save them for future reference.
y
Follow all warnings and instructions marked on the product.
y
Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
y
Do not use this product near water.
y
Do not place this product on an unstable cart, stand or table. The product
may fall, causing serious damage to the product.
y
Slots and openings on the back or cover these openings. The openings should
never be blocked by placing the product on a bed, sofa, rug of other similar
surface. This product should never be placed near or over a radiator or heater.
This product should not be placed in an built-in installation unless proper
ventilation is provided.
y
This product should be operated from the type of power source indicated on
the marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
y
Do not allow anything to rest on the power cord. Do not place this product
where the cord will be walked on.
y
If an extension cord is used with this product, make sure that the total of the
ampere ratings of the products plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total of all
products plugged into the wall outlet does not exceed 15 amperes.
y
Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a risk
of fire or electric shock. Never spill liquid of any kind on the product.
y
Except as explained elsewhere in this manual, do not attempt to service this
product by yourself. Opening and removing the covers that are marked “Do
Not Remove” may expose you to dangerous voltage points or other risks.
Refer all servicing on those compartments service to service personnel.
y
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
