User ManUal
Carving FitnESS™ |
15
to move the Carving, simply lift the rear end of the machine placing hands on the left
and right rear stabilizer and slowly push it forward to the desired location.
The Carving has 6 levellers (4 underneath the frame and 2 under the stabilizers) to
stabilise the unit. Make sure after installation and each time the Carving is moved,
the front frame levellers and the stabilizer levellers are stable and touching the bot
-
tom surface. always turn the locking nuts of the feet against the frame to prevent
damage.
note: the 2 levelers on the pedal side of the frame are only for transportation / in-
stallation purposes. During use these 2 levelers should not touch ground. if these 2
levelers touch ground, it may cause instability and or movement of the Carving unit.
We advise to place the Carving PrO1 on the special Carving Fitness™ anti-slip mat.
the anti-slip mat is optional and can be ordered at your local Carving Fitness Dealer.
the anti-slip mat prevents moving of the Carving on a smooth base floor.
Be cautious when moving the Carving. the Carving is well-built and the stability that
you experience when exercising on the Carving is due to its substantial weight. Use
with care and additional help, if necessary, when moving the Carving. We recom-
mend to move the Carving with 2 persons.
6. MOving tHE Carving
