CARVIN POOL EQUIPMENT INC.
Garantie limitée
Carvin Pool Equipment Inc.
("Carvin")
warrants “Carvin” pool
products to be free of defects in material and workman-
ship for a period of
24
months fromthe date of purchase
with the following exceptions:
Light Bulbs:
Full Moon Watercolor LED light bulbs are
warranted for 12 months from the date of purchase;
incandescent bulbs are warranted for 90 days from the
date of purchase.
Miscellanious:
Filter elements, DE grids, white-goods,
strainer baskets, strainer basket “flap” and “priming
tube”, pressure gauges, square rings, o-rings, gaskets,
and all re-placement parts are warranted for 12 months
from the date of purchase.
Chlorine Generation System:
Salt Chlorine generation systems
are covered by a limited warranty of 24 months; 100%
during the first year, 50% during the second year from the
date of purchase.
StarLight/StarBright/StarWhite:
The LED light is warrantied for a
period of 24 months. The remote control and the AC adapter are
warrantied for 12 months from the date of purchase.
CONDITIONS IN ORDER TO EXERCISE THE WARRANTY
In order to activate this 24 months warranty, ‘’Carvin
products must registered with ‘’Carvin’’ by either of the
following methods:
1- Mail-in Warranty Registration Card
2- Online at,
www.carvinpool.com
All defects must be denounced within 72 hours in order to
avoid the spreading to other equipment, failing which; the
present warranty will not be honoured. This warranty is non
transferable and extends only to the original retail buyer and
only during the time in which the original retail buyer
occupies the site where the product was originally installed.
‘’CARVIN’’ warranty obligation with regard to equipment
which it does no itself manufacture is limited to the warranty
actually extended to ‘’CARVIN’’ by its suppliers (i.e. motors).
This warranty applies to products used in swimming pools,
spas, & aquaculture applications only and does not apply to
any product which has been subjected to negligence,
alteration, accident, abuse, misuse, improper installation,
abrasives, corrosion, improper voltage supply, vandalism,
civil disturbances, or acts of God (including but not limited
to damage caused by freezing, lightning strikes, and other
damage caused by catastrophic events). The only warranties
authorized by ‘’CARVIN’’ are those set forth herein. ‘’CARVIN’’
does not authorize other persons to extend any warranties
with respect to its products, nor will ‘’CARVIN’’ assume
liability for any unauthorized warranties made in connection
with the sale of its products. ‘’CARVIN’’ will not be responsi-
ble for any statements that are made or published, written or
oral, which are misleading or inconsistent with the facts as
published in the literature or specifications furnished by
‘’CARVIN’’.
WARRANTY CLAIM PROCEDURE
Warranty claims shall be made by contacting the
installer/seller, builder, dealer, or retailer (point of purchase)
or the ‘’CARVIN’’ pool products distributor in your area. All
equipment must be inspected by a local ‘’CARVIN’’
authorized representative or at the factory before warranty
is authorized. All charges or expenses for freight to and
from the factory, removal and reinstallation of the products,
or installation of a replacement product are the responsibili-
ty of the purchaser unless otherwise expressly authorized in
writhing by ‘’CARVIN’’. ‘’CARVIN’’, at its discretion, may repair
or replace free of (F.O.B. factory in St-Hyacinthe, Québec,
Canada) any product that proves defective within the
warranty period, or it may issue credit in the amount of the
invoice of the defective equipment in lieu of its repair or
replacement. . ‘’CARVIN’’ reserves its right to substitute new
or improved equipment on any replacements.
REV-F
6
FIG NO.
PIÈCE NO.
DESCRIPTION
M22904240
WWW.CARVINPOOL.COM
Replacement Parts
(Fig. 5)
FIG NO.
PIÈCE NO.
DESCRIPTION
1
42-1679-70-R
Strainer nut (1/4 turn)
2
39-0789-03-R
Strainer cover
3
47-0352-41-R
Strainer cover O-ring
4
16-1052-15-R
Strainer basket
5
16-1102-12-R
Strainer body 12 O’ clock discharge 1-1/2”
6
7
47-0214-06-R
Joint torique corps de la crépine
8
Diffuser O-ring
9
06-0517-39-R
Sharkjet Diffuseur
9
10-1462-07-R
Floating eye seal
11
05-3911-07-R
Impeller 1 HP and 1.5 HP
12
10-0802-08-R
Shaft mechanical seal
13
14-2726-54-R4
Motor bracket
14
15
22-3403-05-R
Flinger
16
-
Motor ( Ask your local pool retailer)
17
22-9018-30-R
Motor gasket ( adhesive foam)
18
19
14-2365-10-R2
Self tapping screws Phillips Pan Head Stn-Stl no.10 x 3/4 ( 2 per bag)
20
23-1994-50-R
Rocker switch for 1 speed motor (2 positions)
22
23
24
25
23-8340-21-R6
Stem bumpers (6 per bag)
26
12-2553-60-R
SharkJet Base
27
21
23-1994-55-R
Rocker switch for 2 speed motor vitesses (3 positions)
28
5a
16-1102-90-R
Strainer body 9 O’ clock discharge 1-1/2”
10
Strainer body main O-ring
47-0361-08-R
02-1349-23-R
Motor bracket bolts ( 4 per bag)
18a
85-8733-65-R
Splash cover end cap
85-8764-83-R
Splash cover
47-0167-07-R
Splash cover O-ring
14-4361-17-R4
Stainless steel (316) nuts 3/8 - 16 x 21/64 Thk . (4 per bag)
14-2630-32-R
Self tapping screw 1/4-14 x 1 1/4 ‘’
Drain Plug with O-ring (2 per Bag
31-1609-06-R2
9 O’clock connector O-ring
47-0225-04-R
9 O’clock connector
31-1587-02-R
29
30
23-8328-70-R
23-2328-53-R
31
23-2328-54-R
Power cord with plug
Insulated Wire (black)
Insulated Wire (Red)
1
5
4
3
2
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
{
29
30
31
