39
REDUCTION MECHANISM
The picture shows the structure of the reduction mechanism.
1. Starter reduction gear
5. Flange starting clutch
2. Starter reduction gear shaft
6. Starting clutch roller spring
3. Starting clutch gear comp
7. Spring holder
4. Starting clutch outer comp.
8. Starter motor
9. Starter motor lead wire
16. Key woodruff
10. Clamp
17. Roller
11. Clamp
18. Needle bearing
12. Bolt
19. O-ring
13. Nut
20. Screw
15. Dowel pin
21. Bolt
REDUCTION GEAR INSPECTION
• Remove the starting clutch.
• Remove the reduction gear to inspect its wearing degree.
• Measure the inner diameter of the reduction gear shaft. It
should be replaced when the diameter is more than 10.05mm.
• Measure the outer diameter of the reduction gear shaft. It
should be replaced when the diameter is less than 9.94mm.
ENGAGING MECHANISM
Summary of Contents for Talon 150 DLX Series
Page 1: ...Talon 150 GX FX DLX Series Service Manual...
Page 4: ......
Page 8: ...4 LOCATION OF PARTS...
Page 76: ...72...