48
DRIVEN BELT PULLEY
DRIVEN BELT PULLEY REMOVAL
• After removing the clutch friction plate, remove the guide pin,
the roller and the movable driven plate.
• Remove the oil seal on the movable driven plate.
DRIVEN BELT PULLEY INSPECTION
• Measure the free length of the driven belt pulley spring.
Service Limit
163.7mm
• Inspect if there is any abrasion or damage on the driven plate.
• Measure the outer diameter of the driven plate pulley hub.
Service Limit
33.94mm
• Inspect of there is any abrasion or damage of the movable driven
plate.
Service Limit
34.06mm
• Inspect if the groove of the guide pin is worn.
Summary of Contents for Talon 150 DLX Series
Page 1: ...Talon 150 GX FX DLX Series Service Manual...
Page 4: ......
Page 8: ...4 LOCATION OF PARTS...
Page 76: ...72...