5
Place two marks side-by-
side of the selected wall studs 192cm (75 5/8”) above
the floor, with 12,
4 cm (4 7/8”) between them. Screw two screws into the
reference marks until the screw heads are protruding about 13mm (1/2’) from the
wall.
3.
Drill pilot holes where you have marked, and mount the dartboard using
the mounting screws provided.
4.
The battery compartment is accessed from the rear of the dartboard by
removing the screw from the base and lifting the back cover. Install 3 AA batteries
(not included) to the battery holder. Replace the back cover and fix with screw.
5.
Familiarize yourself with the function of your dartboard before use.
Should you suspect the dartboard does not work correctly, please refer to the
TROUBLE SHOOTING section in this manual first.
TIPS AND GUIDANCE
This game is designed for use with SOFT-TIP DARTS ONLY. Use of Steel-Tip
Darts will cause damage to the dartboard.
Apply proper force and stance to throw darts. It is not necessary to throw hard for
the darts to stick in the board. The recommended weight of soft-tip darts is no
more than 16 grams.
To reduce bounce-outs, you shall use the same kind of soft tips as those come
with the game. Long tips are not recommended for this game.They break or crook
more easily.
When removing dart from the board, apply a little twist to the right while pulling the
dart out will make it easier.
Summary of Contents for Score-301
Page 19: ...18 BESCHREIBUNG ELEKTRONISCHES SOFT TIP DARTSPIEL DEUTSCH...
Page 97: ...96...
