44
③ Automatic online button,Click “
”,to enter the automatic on-line process. Nothing else can be done
while the device is executing. After the on-line completion, it will automatically generate all the indoor units
that are currently on-line, but will not automatically delete the devices that are not currently on-line.Device
deletion can only be done manually.
④ Edit button,Click the device to enter the device editing interface. The device that has been generated
and saved can only modify specific parameters.
"Device Type/Device model/Bus Address. Gateway address/Device address" cannot be modified
3.8 Partition setting
Partition Settings are used for device partition management and are divided into three levels
“building”,A completed building, such as an office building. Each building may contain several floors
“floor”,Refers to a floor in a building, each floor may contain several zones
“zone”,zones refers to the sub-division under the floor level, and each zones can contain several devices
3.8.1 Building arrangement
① Name of the building, click the entry to select the current building, or click fold/Expand the building, Click
“
” to expand details, click “
” to fold details.
② Edit button
,Click add new building
,Click edit building name
,Click delete current building
①
②
6