14
2.2 Network Settings
① Click the select network and select "LAN1/LAN2/WLAN", where "LAN1/;AN2 "refers to the wired network,
which corresponds to" LAN1 "and" LAN2 "respectively printed on the screen at the wiring position. When
"WLAN" is selected, it means networking with wifi. The "Select WLAN" function button can be used to search
the current network and connect.
② Select the network you have searched for, type your password and click "OK" to connect, and click "Back"
to cancel the current Settings.
③ Select automatic access to IP address, when select this option, the system automatically access to IP
address, subnet mask, gateway, DNS and other information, select automatic access to IP address, default
select automatic access to DNS
④ Choose to use the following IP, select this option, need to manually enter the IP address, subnet mask,
gateway address. And activate the DNS option, optionally automatically get DNS or use DNS
Choose automatic DNS function, the system use default DNS Settings, optional use of the following DNS, can
manually enter the preferred DNS address and alternative DNS address.
Click Skip to skip the feature setting. After skipping, automatically set to LAN1 interface and use automatic
acquisition mode
①
②
③
④
