41
③ Automatic online button, Click “
”，to enter the process of automatic on-line. Nothing else can be
done while the device is executing. After the on-line completion, it will automatically generate all the indoor
units that are currently on-line, but will not automatically delete the devices that are not currently on-line.
Device deletion can only be done manually.
④ Edit button, click the device into the device edit interface, the device that has been generated and saved,
can only modify specific parameters.
"Device Type/Device model/Bus Address. Gateway address/Device address" cannot be modified
3.7.2 Full heat exchanger commissioning
Full heat exchanger commissioning, click "COM1/COM2" to update the bus, and automatically launch all
total heat exchangers under the current line, which are automatically grouped and named according to
different gateways
① Click the filter button to select "All/edited/unedited" to improve commissioning efficiency
② Add/delete button, click "-" to delete, and the interface pops out as shown in the figure below. Click the
corresponding indoor unit to select. After selecting the device, click "Complete" to delete the selected device,
if select cancel, will exit delete mode
①
② ③
④