Carrier UPC Open, Installation And Integration Manual

Page: 6 / 30

UPC Open overview and specifications
UPC Open Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation and Integration Guide All rights reserved
2
Specifications
Driver drv_upcopen_x-xxx-xxx
Maximum number of control
programs
2
Maximum number of
BACnet objects*
1050
* Depends on available
memory
Total available memory for application is 551244 bytes.
Obtain available memory information by viewing a Module Status report after the
control program is loaded.
Power 24 Vac ±10%, 50–60 Hz
10 VA power consumption (16 VA with BAC view ® device attached)
26 Vdc (25 V min, 30 V max)
Single Class 2 source only, 100 VA or less
We highly recommend using a dedicated transformer to power the UPC Open.
BAS port (Port 1a) 3-pin port supports EIA-485 2-wire communications.
Protocols supported (DIP switch selectable):
○
BACnet MS/TP (m)
○
BACnet ARC156
○
Modbus (RTU) (future)
○
Johnson N2 (future)
○ LonWorks (future)
This port must be configured as a BAS port.
CCN port (Port 2) 5-pin port supports EIA-485 3-wire connection to a single Carrier CCN controller
LON-OC port 14-pin communication port supports the LonWorks Option Card (future)
Rnet port The UPC Open only supports ZS sensors, Equipment Touch, and wireless sensors
with the 6.04.xxx or later driver.
Supports:
•
Up to 10 ZS sensors (5 per control program)
• One Wireless Adapter that communicates with up to 15 wireless sensors
•
One Equipment Touch
• Up to 4 SPT Standard sensors and one SPT Plus, SPT Pro, or SPT Pro-F
sensor.
NOTE ZS sensors, a Wireless Adapter, and an Equipment Touch can share the
Rnet, but not SPT sensors.
Local Access port For system start-up and controller troubleshooting using Field Assistant or
Equipment Touch
Battery 10-year Lithium CR2032 battery retains the following data for a maximum of
10,000 hours during power outages: control programs, editable properties,
schedules, and trends.
Protection Built-in surge and transient protection circuitry - internal solid state Polyswitches
on the incoming power and network connections.
Real time clock Battery-backed real time clock keeps track of time in the event of a power failure