![background image](http://html1.mh-extra.com/html/carrier/uc-open/uc-open_installation-and-startup-manual_2562521013.webp)
Installing the UC Open
UC Open
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
9
To wire inputs and outputs
1
Verify that the UC Open's power and communications connections work properly.
2
Pull the screw terminal connector from the controller's power terminals labeled
Gnd
and
Hot
.
3
Connect the input wiring to the screw terminals on the UC Open.
NOTES
○
Connect the shield wire to the
GND
terminal with the ground wire.
○
IN-5
and
IN-6
share the
GND
terminal above
IN-5
.