Installing the UC Open
UC Open
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
10
4
Set the appropriate jumpers on the UC Open.
To use...
For...
IN-1 or IN-2
Thermistor
Dry contact
0–5 Vdc
Set jumpers
IN-1
or
IN-2
to the type of signal the input will
receive.
All
Thermistor
Dry contact
Verify the
IN-5
jumper is on.
Rnet Port
ZS sensors
Wireless Adapter for
wireless sensors
Equipment Touch
TruVu™ ET Display
Verify that the
Rnet
jumper to
Rnet
.
5
Connect the binary output wiring to the screw terminals on the UC Open and to the controlled device.
6
Insert the power screw terminal connector into the UC Open's power terminals.
