![background image](http://html.mh-extra.com/html/carrier/tp-wem01/tp-wem01_advanced-installation-and-configuration-instrucrions_2564146105.webp)
105 |
P a g e
b. Press
Yes
c. Press
Dehumidifier
3) Complete the guided installation process.
4) Set dehum active state:
By default the thermostat will configure the dehumidifier
output (ACC+) as active Open. For geothermal heat pumps configuration setting will
need to be changed to active Closed.
The setting can be changed on the thermostat by going to: Menu > (hold) Service >
Installation Settings > Equipment Setup > Accessory > Dehum Active
5) Congratulations you have correctly set-up the geothermal system
Summary of Contents for TP-WEM01
Page 38: ...38 P a g e ...
Page 50: ...50 P a g e ...