![background image](http://html.mh-extra.com/html/carrier/tp-wem01/tp-wem01_advanced-installation-and-configuration-instrucrions_2564146011.webp)
11 |
P a g e
3) Connect Repurposed Wire to the Thermostat
a.
When you’re ready to connect the wires to your new thermostat, connect the
G wire to the C connector block on the thermostat
NOTE
: there will no longer be a wire connected to the G terminal at the
thermostat.
4) Guided Setup
a.
The thermostat automatically detects the wires you’ve connected
b. You will receive a warning the G wire is not connected. You must disable
Auto Detection by touching the red Override button then touch Yes.
Summary of Contents for TP-WEM01
Page 38: ...38 P a g e ...
Page 50: ...50 P a g e ...