![background image](http://html.mh-extra.com/html/carrier/tp-wem01/tp-wem01_advanced-installation-and-configuration-instrucrions_2564146102.webp)
102 |
P a g e
b. Press
Yes
c. Press
Dehumidifier
NOTE
: The DHUM on the furnace board is active in the open state. The ACC+
terminal for dehumidifiers is defaulted to active open. So, no other changes are
necessary. You can double check this setting on the thermostat
Menu > (hold) Service > Installation Settings > Equipment Setup >
Accessory > Dehum Open
3) (Optional) Configure Cool to Dehumidify
a. Select Menu > Profiles > Humidity Profiles > Dehumidification Setpoint
b. Default:
Disabled
c. Options:
Overcool temperature between 0.5oF and 5oF or disabled
Humidity setpoint between 46% and 58%
Summary of Contents for TP-WEM01
Page 38: ...38 P a g e ...
Page 50: ...50 P a g e ...