Carrier Touch Pilot Page 12 Manual Download

Page: 12 / 36

4.8 - Main menu

The. Main. menu. provides. access. to. the. main. control.
parameters, including general parameters, inputs and outputs
status, etc.

• To access the menu, press the

Main menu

button

located in the upper-left part of the Synoptic screen.

• Specific.unit.parameters.can.be.accessed.by.pressing.

the icon corresponding to the desired category.

• To go back to the Synoptic screen, press the

Home

button

General parameters screen

The.General.parameters.screen.provides.access.to.a.set.of.
general unit parameters.

• To access the General parameters screen, go to the

Main menu and select

General Parameters

(GENUNIT).

• Press the

Up/Down

.buttons.to.navigate.between.the.

screens.

Press the

Up/Down

buttons

.to.navigate.between.

the screens.

4.9 - Configuration menu

The.Configuration.menu.gives.access.to.a.number.of.user-
modifiable.parameters.such.as.pump.configuration,.schedule.
menu, etc.

• To.access.the.Configuration.menu,.press.the.

Main

menu

button

located in the upper-left part of the

Synoptic.screen,.and.then.find.and.press.

Configuration

Menu.

• Press.the.field.corresponding.to.the.parameter.to.be.

modified.and.introduce.all.the.necessary.changes..

• Press the

Up/Down

buttons.to.navigate.between.the.

screens.

Once.all.the.necessary.modifications.have.been.made,.press.
the

Save

.button.to.save.your.changes.or.the.

Cancel

button

to.exit.the.screen.without.making.modifications.

4.10 - System configuration override

In.some.cases.it.is.possible.to.override.system.configuration..
The. override. screen. provides. the. option. to. issue. the.
command.overriding.the.current.operation.of.the.unit..

To.access.the.override.screen,.press.the.forceable.point.of.the.
data.screen..Note.that.not.all.parameters.can.be.overridden.
by the control.

Forced value

Set force

Auto (force removed)

Press

to set or

to remove the forced point.

Summary of Contents for Touch Pilot





































Search results

Summary of Contents for Touch Pilot

Reviews:

Related manuals for Touch Pilot

Brands by name

Popular brands

Carrier Touch Pilot, Manual

Search results

Summary of Contents for Touch Pilot

Reviews:

Related manuals for Touch Pilot

Brands by name

Popular brands