![background image](http://html1.mh-extra.com/html/carrier/rtu-open-v3/rtu-open-v3_installation-and-startup-manual_2562508047.webp)
Start-up
RTU Open v3
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
43
Configuring the RTU Open's properties
To start up the RTU Open, you must configure certain points and properties. Appendix A is a complete list of all the
points and properties, with descriptions, defaults, and ranges. These properties affect the unit operation and/or
control. Review and understand the meaning and purpose of each property before changing it.
•
Unit Configuration properties
(page 63)
•
Setpoint Configuration properties
(page 70)
•
Service Configuration properties
(page 78)
•
Linkage properties
(page 88)
•
Equipment Touch Startup Wizard
(page 95)
See
Appendix A
(page 93) for a complete list of the controller's points/properties.
NOTE
Engineering units shown in this document in the defaults and ranges are strictly for reference. You must
enter an integer only.
Summary of Contents for RTU Open v3
Page 113: ......