manualshive.com logo in svg

Carrier P1 Plus series, Owners And Installation Manual, Page: 31 / 40

Share
Download
Carrier P1 Plus series Owners And Installation Manual Download Page 31

28

CONNECTING TH

Figure 12

Figure 13

• Next, check the drainage of the unit by pouring some water into the unit drain pan and ensure that the water drains out through the drain hose and

that there is no leakage from the other parts.

• After installation, if there is a significant gap between the unit and wall,  it can be adjusted by securing 2 screws to the body and wall hang bracket.

Refer to the screw hole location(A, B) in Figure 12.

• Removing the frame grille ;

 

 Detach terminal block cover by removing two  screws and remove two  screws from frame grille.

 Pull the triangle marks  located at the bottom of  the frame grille and lift frame grille to the top of the unit.

• The recommended bending of the drain

hose is shown in Figure 13.

NOTE

Wall hang

bracket

Hook

Hole

 [mm]

INDOOR UNIT INSTALLATION

   300

           220

   

A

          

B

42KH5A54020_I

2004.6.11, 3:15 PM

Page 28

Adobe PageMaker 6.5K/PPC

Summary of Contents for P1 Plus series









































Reviews:

No comments