manualshive.com logo in svg

Carrier P1 Plus series, Owners And Installation Manual, Page: 20 / 40

Share
Download
Carrier P1 Plus series Owners And Installation Manual Download Page 20

17

UNIT OPERATION

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345

AIR CLEANING OPERATION

Information for filters

• Filters

Air filters
Option 1 : Electro Active carbon filter
Option 2 : Electro Photo-catalyst filter

• Air filters eliminate dust and lint
• Optional Electrostatic filter/Photo-catalyst filter effectively eliminates microscopic dust and cigarette smoke in the room air.
• Optional Electrostatic filter/Active carbon filter is particularly effective in eliminating odor and microscopic dust.

Standard
  Air Filter

Electrostatic Filter
(White, Optional)

+

Photo-Catalyst Filter

(Blue, Optional)

Electrostatic Filter
(White, Optional)

+

Active Carbon Filter

(Black, Optional)

• The life of above filters varies according to the amount of cigarette smoke, room size and the operating time.
• Air filters can be cleaned with a vacuum cleaner or rinsed under running water after using a month.
• The life time of optional Active carbon filter is about 2 years and that of optional Electrostatic filter is about 3 months. Active carbon filter can be washed using neutral
   detergent, rinsed water and exposed under direct sunlight.
• The life time of optional Photo-catalyst filter is about 2 years. This filter can be washed under running water and can be refreshed by exposing under direct sunlight.

Exposed time is 6 hours after using 3 months.

Life time of filters

42KH5A54020_O

2004.6.11, 3:7 PM

Page 17

Adobe PageMaker 6.5K/PPC

Summary of Contents for P1 Plus series









































Reviews:

No comments