
15
Ioniser function button
...................................................................................
Press Ioniser button
to activate Ioniser function
during unit ON.
Press Ioniser button
again to stop
Ioniser function.
re ...............................................
timer setting, press the
nction, press button .
main operative until one
is active.
UNIT OPERATION
Press this button to set the SLEEP timer with remote control on. The icon will
appear on the display.
This procedure permits setting the remaining unit operating time.
Sleep timer procedure “night”
..........................................................................
1
Sleep Timer
“1:hr” will be displayed together with the icon.
Press button (temperature increase).
The display will show the following settings in sequence:
1 hr, 2 hr, 3 hr, 4 hr, 5 hr, 6 hr, 7 hr, 8hr and 9 hr.
Once the remaining operating hours have been selected
with either button or , again press button
to
confirm.
When the SLEEP timer is set, the unit will control the
set temperature to avoid overcooling or overheating
during operation.
The set temperature will change as follows:
2
3
4
Personalisation and Ioniser function
Personalisation
and
...........................................................................
If you want memorize a personalised operating mode, recallable at any time,
proceed as follows:
1
With the remote control ON or OFF, select the desired operating mode,
temperature, fan speed and louver.
Press button
for more than 5 seconds.
2
At this point, all selected and memorised functions can be activated through
button , whatever the unit operating mode. Once the personalised mode has
been entered, press one of the buttons ,
, , to exit.
If you want to change one or more memorised parametres, begin again from
point 1.
1
2
• When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed
so as not to interrupt sleep.
• The SLEEP timer can be combined with the ON timer.
NOTE
42KH5A54020_O
2004.6.17, 11:25 AM
Page 15
Adobe PageMaker 6.5K/PPC