![background image](http://html.mh-extra.com/html/carrier/edge-tp-nac01-a/edge-tp-nac01-a_owners-manual_2564087016.webp)
14
OPERATING THE THERMOSTAT
Setting the home temperature
1. Open the door.
2. Press the
home
button located under the display on the
left. You will see a triangle icon (
B
) above the
home
button. This icon will always tell you whether you’re in
the home, away or sleep setting.
3. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
4. To change the heating setting, press the
mode
button on
the left until you see the word
heat
on the screen on the
left.
5. Press the
up
or
down
button until you reach the desired
temperature setting. The arrow pointing to the
home
button will disappear.
6. Press and hold the
home
button for about three seconds.
The home arrow will be displayed, indicating that the
thermostat has saved your settings.
7. To change the cooling temperature setting, press the
mode
button repeatedly until you see the word
cool
on
the screen on the right.
Summary of Contents for edge TP-NAC01-A
Page 1: ...TP NHP01 A TP NAC01 A TP NRH01 B Edger Non Programmable Thermostat Owner s Manual ...
Page 2: ......
Page 43: ......