16
OPERATING THE THERMOSTAT
Setting the away temperature
1. Press the
away
button located under the display in the
center. You will see a triangle icon (
B
) above the
away
button.
2. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
3. To change the heating settings, press the
mode
button
until you see the word
heat
on the screen on the left.
4. Press the
up
or
down
button on the right until you reach
the desired temperature setting. The arrow pointing to
the away button will disappear.
5. Press and hold the
away
button for about three seconds.
The away arrow will be displayed, indicating that the
thermostat has saved your settings.
6. To change the cooling temperature setting, press the
mode
button repeatedly until you see the word
cool
on
the screen on the right.
Summary of Contents for edge TP-NAC01-A
Page 1: ...TP NHP01 A TP NAC01 A TP NRH01 B Edger Non Programmable Thermostat Owner s Manual ...
Page 2: ......
Page 43: ......
