Carrier ComfortVu Plus TBPL-H Installation And Operation Manual Download Page 21

Page: 21 / 71

ComfortVu™ BACnet Thermostat Plus Model TBPL-H (Line voltage)Carrier Proprietary and Confidential

Installation and Operation Guide

Stop time

5. Press the

button again. The w

ord “Stop” will appear on display, and the HOURS will

flash.

6. Use the ▲or ▼buttons to adjust the stop time hours of the first event.

7. Press the

button again. The MINUTES will flash.

8. Use the ▲or ▼buttons to adjust the stop time minutes of the f

irst event.

•

Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or

P2, P3, and P4 for four events per day).

•

Follow the steps above for all daily periods.

Adjusting “US type” daily programs

Start time

1. Press the

button. The programmed weekday(s), “P1” indicating the first program event

of the day and the word “Start” will appear on display. The HOURS will flash.

2. Use the ▲or ▼buttons to adjust the start time hours of the first event.

3. Press the

button again. The MINUTES will flash.

4. Use the ▲or ▼buttons to adjust the start time minutes of the first event.

System mode

5. Press the

button again. The selected system mode for the current programmed event

will appear on display.
6.

Use the ▲or ▼buttons to select the mode (default Auto mode).

Fan speed

7. Press the

button again. The selected fan speed for the current programmed event will

appear on display.

8. Use the ▲or ▼buttons to select the fan speed (default Auto speed

Summary of Contents for ComfortVu Plus TBPL-H







































































Search results

Summary of Contents for ComfortVu Plus TBPL-H

Reviews:

Related manuals for ComfortVu Plus TBPL-H

Brands by name

Popular brands

Carrier ComfortVu Plus TBPL-H, Installation And Operation Manual

Search results

Summary of Contents for ComfortVu Plus TBPL-H

Reviews:

Related manuals for ComfortVu Plus TBPL-H

Brands by name

Popular brands