![background image](http://html1.mh-extra.com/html/carrier/aquaforce-30xb-1000/aquaforce-30xb-1000_installation-operation-and-maintenance-instructions_2562362061.webp)
61
9.2.2 - 30XB 400 & 450 - heat reclaim option
Legend
All dimensions are given in mm.
B
Required clearances for maintenance (see note)
C
Recommended space for evaporator tube removal
Water inlet for standard unit - for options 100A, 100C, 107 refer to the certified
drawing.
Water outlet for standard unit - for options 100A, 100C, 107 refer to the certified
drawing.
Air outlet – do not obstruct
Power supply and control connection
A
Heat reclaim condenser
ATTENTION: The condenser connection sleeves are not
installed, but supplied with the unit. The sealing joints are in
the control box. The temperature sensors and the condenser
flow switch are wired and fixed in the machine. They must
be installed as described in the chapter “Condenser water
connections”.
NOTES:
-
Drawings are not contractually binding.
-
Before designing an installation, consult the certified
dimensional drawings, available on request.
-
If the installation includes several units or if this (these)
is (are) close to walls, please refer to chapters 3.13 -
“Multiple chiller installation” and 3.14 - “Distance to the
wall” of the installation manual to determine the space
required
9 - HEAT RECLAIM CONDENSER OPTION (OPTION 50)