background image

Packaged rooftop units 

with integrated gas burner

3

1. I

NTRODUCTION

2. O

PERATION

 

LIMITS

The 

48EN/EH

 cooling units and heat pumps are autonomous air-air 

units with a compact monoblock, horizontal rooftop design with a built 

in natural or propane gas burner (in accordance with the gas Directive 

90/396 EEC). 

They are equipped with centrifugal and axial fans, air coils, hermetic 

scroll compressors and electronic control with microprocessor, 

components optimised for the R-410A refrigerant.

These units have been designed for the air conditioning of large surface 

areas used for business or industry in areas with particularly low outdoor 

temperatures in winter.

A vast number of options meet numerous operating demands thus 

enabling quick installation and reliable operation.

 

Space 48EN Series

Autonomous air-air 

cooling

 units with a compact horizontal rooftop 

design with a built in gas burner.

 

Space 48EH Series

Autonomous reversible air-air 

heat pump

 units with a compact 

horizontal rooftop design with a built in gas burner.

After manufacturing, all units are charged with refrigerant and 

are tested at the factory, verifying the correct operation of all 

their components.

In this brochure are described the actions and safety norms for a 

correct unit handling.

  

With a condensation pressure control operating down to -10ºC.

  

With high powered axial fan operating up to 52ºC. 

 

With outdoor temperatures below -15ºC it is compulsory to select the anti-freeze 
protection option for the electric panel.

Inlet air conditions

Cooling

Heating

Indoor coil 
heat pump

Minimum

14ºC WB

10ºC

Maximum

22ºC WB

27ºC

Outdoor coil
heat pump

Minimum

12ºC 

-10ºC WB

Maximum

48ºC 

15ºC WB

Gas Burner

Minimum

--

-30ºC 

Summary of Contents for 48EH

























Reviews: