3-6. HOW TO CHANGE INDICATION AND SETTING POINT
3-6-1. Indication of setting point
Section 3-5-2. How to change indication by, it makes shows present "chilled water temperature
setting point".
3-6-2. How to change setting point
After making showing present setting point temperature, it changes setting point
temperature by a following process.
To change the temperature
of chilled water
7.0
℃
Push the"SET"key
for about 2 seconds.
A numeral that shows setting
point temperature blinks.
Push"
▲
"or"
▼
" key.
7.5
℃
Push the"SET"key
Setting point change is decided.
When it pushes whether there is no key operation and the"BACK" key for 1 minute, it becomes a
generator temperature indication.
NOTE 1: Wrong setting may cause the failure of the Chiller.
If you need to change setting point, please be sure to consult Carrier service
agent. In case you set chilled water outlet temperature below rated value,
maximum input needs to be decreased. Please be sure to
consult Carrier service agent.
NOTE 2: Setting point become effective upon changing them.
Please be careful in changing set values during operation.
28