![background image](http://html.mh-extra.com/html/carrier/16lj-01/16lj-01_operation-manual_2562231026.webp)
3-3-4. How to change remote continuous, pulse ,etc. setting
After wiring of remote signal, setting of operation board shown below should be conducted.
Refer to Field Electric Wiring.
Operation board setting
REMOTE
SIGNAL
type
(1)
free
(2)
(3)
(4)
free
(5)
Display example
High temperature generator temperature
Push the "SET" key
for about 2 seconds.
Push "
▲
" or "
▼
" key.
Push the "SET" key
for about 2 seconds.
Push "
▲
" or "
▼
" key.
Push the "SET" key for about 2 seconds.
Then push "
▲
" or "
▼
" key.
To change
static mode
To change pulse mode
By pushing a "SET" key, static mode is decided.
By pushing a "SET" key, pulse mode
is decided.
Push the "SET" key for about 2 seconds.
Then push "
▲
" or "
▼
" key.
To change
static mode
To change pulse mode
By pushing a "SET" key, positive mode is decided.
By pushing a "SET" key, negative mode
is decided.
Push "
▲
" or "
▼
" key.
22