Carrier Access Adit 3200 Reference Manual Download

Page: 113 / 262

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI

3-3

Network

Connections

Overview

Adit MSR Connections

The MSR provides the following connections:

LCC 1-8

– Link Cross-Connects (LCCs) are resources that can be cross-connected to Adit 600

resources. There are three user-configurable types of LCCs:

- Data

- Data-typed LCCs are used for PPP or MLPPP WAN links between the MSR card and

any available Adit 600 WAN destination, such as T1 lines or WAN-capable cards.

- Voice

- Voice-typed LCCs are used for CAS links between MSR CAS trunk functionality

and Adit 600 external T1 lines. (E1 to be available in a future release.)

- PRI

- PRI-typed LCCs are used for PRI links between MSR PRI trunk functionality and Adit

600 external T1 lines. (E1 to be available in a future release.)

Ethernet 1

- LAN Ethernet by default. (Can be configured for WAN usage.)

Ethernet 2

- WAN Ethernet by default. (Can be configured for LAN usage.)

The following types of connections can be created with the

New Connection

option:

Point-to-Point Protocol over DS0 (Serial)

- Connect to the Internet using a PPP tunnel over

HDLC.

Multilink Point-to-Point Protocol over DS0 (Multilink)

- Connect to the Internet using a

MLPPP tunnel over HDLC.

Point-to-Point Tunneling Protocol (PPTP)

- Enable secure transfer of data to another

location over the Internet.

Point-to-Point Tunneling Protocol Server (PPTP Server)

- Enable Virtual Private Network

(VPN) connections to your home network from other locations.

Layer Two Tunneling Protocol (L2TP)

- Enable secure transfer of data to another location

over the Internet.

Internet Protocol Security (IPSec)

- Enable secure transfer of data to another location over

the Internet, using private and public keys for encryption, and digital certificates for
authentication.

Summary of Contents for Adit 3200







































































































































































































































































Search results

Summary of Contents for Adit 3200

Reviews:

Related manuals for Adit 3200

Brands by name

Popular brands

Carrier Access Adit 3200, Reference Manual

Search results

Summary of Contents for Adit 3200

Reviews:

Related manuals for Adit 3200

Brands by name

Popular brands