Carrier Access Adit 3200 Reference Manual Download

Page: 16 / 262

1-8

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI

Web Based Management

Home

Host Information Window

To display this window, click on the Computer Host icon on the Network Map.

The Host Information window displays network information for the corresponding
computer.

Field

Definition

Host

Displays the Host Name.

IP Address

Displays the Host IP Address.

Subnet Mask

Displays the Subnet Mask of the Host IP Address.

Network Connection

Displays the type of Network Connection.

Lease Type

Displays the type of lease.

Local Servers

Displays the Local Server.

Ping Test

This button will test the connectivity through a Ping test.
See the following section on

Test Connectivity

Windows Shared Folders

Displays an address for the host, which is also a link to the address.

Summary of Contents for Adit 3200







































































































































































































































































Search results

Summary of Contents for Adit 3200

Reviews:

Related manuals for Adit 3200

Brands by name

Popular brands

Carrier Access Adit 3200, Reference Manual

Search results

Summary of Contents for Adit 3200

Reviews:

Related manuals for Adit 3200

Brands by name

Popular brands