Carrera 18016011, Instruction Manual

Page: 18 / 72

20 EN
05. OPERATION
How to assemble/disassemble the vegetable slicer/grater
1. Insert the required grating or slicing drum
5 / 6 / 7
into the housing
2
.
Position the snap-in openings
8
above the catches then push the insert
down until it locks in place with an audible click.
2. Loosen the locking screw and remove the cap (see fig.
A
).
3. Insert the mounted vegetable slicer/grater into the accessories coupler then
tighten the locking screw (see fig.
B
).
4. To remove the drum, put your thumbs into the drum then pull it out of the
housing with slight outward pressure (see fig.
C
).
A C B
How to use the vegetable slicer/grater with the food processor
1. Cut the required food into pieces so that it fits through the filler tube
2
. If
necessary, remove the inside, seeds or peel from the fruits to be processed.
2. Place a suitable container underneath the opening of the vegetable slicer/
grater.
3. Now you may connect the plug to a wall socket. Never do this beforehand.
4. Switch on the food processor and set the speed control to speed level
1 ;
the drum rotates. You can increase the speed level depending on the food
to be processed. However, speed level
3 must not be exceeded.
5. Use the tamper
1
to carefully push the food down the filler tube.
NOTE: When filling in the food, make sure it covers the entire width of the gra-
ting or slicing drum. Thus, you can achieve best possible results.