Car Park 3
–
Planning and design
11
3. Designing the placement of sensors, indicators, cable trays and cabinets
1. After the definition of the LLP for each bay, choose among bay-mounted vertical sensors,
lane-mounted 45-degree sensors or sensors and separate LED indicators.
Note: If you want to use external LED indicator SBPILED, please make sure they are installed on
the lane, so that they are visible for drivers at a satisfactory distance.
2. The sensor/base can be mounted either on the ceiling or a rail. Daisy-chain all the sensor
bases and display interface modules in the lane with the Dupline® 3-wire bus.
3. Power the system ON
4. Set the sensors and displays up by means of the UWP 3.0 Tool.
5. Mount the sensor directly on the ceiling, in a tray or lowered.
Note: always try to choose the most functional and aesthetic solution according to cost-
effectiveness.
6. Select the bays to be used for the disabled parking bays.
Note: Normally, disabled parking bays are placed close to escalators and elevators, and their
numbers are determined in accordance with regulatory laws.
Summary of Contents for Dupline Carpark 3
Page 1: ......
