Carl Valentin Pica II 103/8 T, Quick Reference Manual

Page: 68 / 130

Pica II
68 English
Load Label Roll in Standard Mode
E
B
C
J
D
A
H
K
F
G
I
•
Open the printer cover.
•
Open the printhead (K) by turning the red pressure lever (J) anticlockwise.
•
Remove the outside label mounting plate (A).
•
Load the label roll with inner winding onto the unwinding roll (B).
•
Attach again the label mounting plate (A).
•
Lead the label material below the return pulley (D) and the printhead (K).
Pay attention that the label runs through the photocell (E).
•
In order to move the printhead (K) down, turn the red pressure lever (J) in clockwise direction until it locks.
•
Adjust the adjusting ring (C) of the return pulley (D) to the width of material.
•
Close the printer cover.
Load Label Roll in Tear-off Mode
The printer is equipped by default with an integrated tear-off edge (not with option cutter or dispenser).
For an operation with tear-off edge (I) unscrew the two knurled knobs (F) and remove the front plate (G).