Carl Valentin FLEXICODE 53, Operating Manual

Page: 59 / 120

Flexicode Function Menu
11.19 Operating Manual 59
−
xx mm = The feedback can be made smaller. It causes loss of
transfer ribbon but the number of cycles is increased. If the value is
increased to the complete backfeed length then the direct print
module sets automatically the max. value and no more backfeed is
accomplished.
+xx mm = The feedback can be made larger. This causes that it is
printed onto the transfer ribbon in the previous printout.
W W W W W W W W
Press the key to move to the next menu item.
sa/mm: The smallest possible distance of two prints with full ribbon
save (the print offset must be set to the minimum value). As basis for
the calculation the set ribbon save parameters are used, as well as
mode and especially the indicated max. print speed.
cmin: Max. number of cycles per minute.
so/mm: Indicates the loss of ribbon save, i.e. how many mm transfer
ribbon is effectively lost.
Example
Performance
information